Explore our ISO 9001 certified range of high-performance rotary compressors, integrated compression-cutting equipment, and heavy-duty HVAC tooling engineered for Irish environmental and thermal standards.
As Ireland accelerates its decarbonization mandate under the National Climate Action Plan, the demand for high-efficiency rotary compressors in commercial refrigeration, heat pumps, and industrial compressed air has reached unprecedented levels. Modern Irish OEMs, MEP contractors, and facility managers require reliable, low-GWP, inverter-driven rotary compression technology backed by stringent European compliance frameworks.
Understanding the precise mechanics of hermetic twin-rotary vs. single-rotary compression for temperate maritime climates.
Our twin-cylinder rotary designs feature dual eccentrics positioned 180° out-of-phase. This mechanical symmetry eliminates mechanical vibration by up to 75% compared to legacy single-cylinder units, reducing acoustic signatures below 48 dB(A) in residential heat pump installs across Irish urban centers like Dublin, Cork, and Galway.
Equipped with rare-earth permanent magnet Brushless DC (BLDC) motors, our variable-speed rotary compressors adjust speed dynamically between 15 Hz and 120 Hz. This dynamic response maximizes Seasonal Performance Factor (SPF) during mild, humid Irish winters where ambient temperatures fluctuate between 2°C and 10°C.
Optimized internal volume ratios and synthetic POE/PVE lubricants engineered specifically for low-GWP refrigerants including R290 (Propane, GWP=3), R32 (GWP=675), and R454B. Designed to withstand severe discharge temperature envelopes without oil degradation.
| Compressor Series | Displacement (cc/rev) | Refrigerant Type | Nominal Capacity (W / BTU) | COP (W/W) | Electrical Power Input | Target Irish Application |
|---|---|---|---|---|---|---|
| RTC-R290-INV | 10.8 – 24.5 | R290 (Propane) | 3,400W – 8,800W | 4.25 – 4.60 | 230V / 50Hz Single-Phase | SEAI Residential Air-to-Water Heat Pumps |
| RTC-R32-VFD | 15.0 – 36.0 | R32 / R410A | 5,200W – 14,500W | 3.95 – 4.30 | 230V / 400V 50Hz Dual | Commercial VRF & Light Industrial Chillers |
| RTC-R134a-MED | 18.2 – 48.0 | R134a / R513A | 2,800W – 11,200W | 3.10 – 3.55 | 400V 50Hz 3-Phase | Munster Dairy & Cold Chain Refrigeration |
| RTC-DUAL-HEAVY | 32.0 – 68.0 | R454B / R32 | 12,000W – 28,000W | 4.15 – 4.50 | 400V 50Hz 3-Phase | Pharma Cleanroom Dehumidification & HVAC |
Tailored engineering solutions catering to Ireland's unique climate, regulatory landscape, and industrial infrastructure.
Ireland's Sustainable Energy Authority of Ireland (SEAI) offers significant grants for retrofitting fossil-fuel boilers with modern heat pumps. Our R290 rotary compressors achieve water exit temperatures up to 65°C even when ambient outdoor temperatures dip to -7°C in inland counties like Westmeath or Tipperary. Low noise generation satisfies strict Irish planning permission requirements in high-density suburban developments.
From milk cooling tanks on dairy farms in Cork and Kilkenny to central distribution hubs supplying major supermarket chains, reliable continuous cooling is mandatory. Our heavy-duty rotary units maintain strict evaporating temperatures (-10°C to +5°C) with high volumetric efficiency, operating smoothly under unpredictable rural power grid fluctuations.
Ireland hosts 9 of the top 10 global biopharmaceutical companies. These sterile production facilities demand 24/7 climate control with zero downtime. Our inverter-driven rotary units integrate seamlessly into precise air handling units (AHUs), offering tight relative humidity control and zero refrigerant leakage under ISO Class 5 cleanroom operational parameters.
Exposed to harsh Atlantic marine environments around Shannon, Donegal, and Rosslare, outdoor HVAC housings face extreme salt-spray corrosion. We furnish OEM rotary compressors fitted with anti-corrosive C5-M compliant casing coatings, epoxy-coated coils, and stainless-steel fastener configurations tailored for maritime installations.
Procurement professionals importing industrial equipment into the Republic of Ireland must adhere strictly to European Single Market standards. Partnering with a China supplier that proactively embeds EU compliance into product design ensures frictionless customs clearance at Dublin Port, Cork Port, or Shannon Airport.
With the EU F-Gas Regulation driving hydrofluorocarbon (HFC) quotas down aggressively towards 2030, Irish buyers must avoid legacy high-GWP refrigerants like R410A in new installations. Our factory has fully transitioned assembly lines to ultra-low GWP natural refrigerants (R290) and low-GWP A2L alternatives (R32, R454B).
All exported rotary compressors satisfy Seasonal Energy Efficiency Ratio (SEER) Tier 2 requirements. Integrated motor windings utilize high-grade copper with low electrical resistance, driving seasonal COP values well above minimum European threshold mandates.
Irish standard supply voltage operates at 230V (+10%/-6%) 50Hz single-phase or 400V 50Hz three-phase. Our internal compressor motors feature built-in thermal overload protection and low lock-rotor current (LRA) soft-start capabilities, safeguarding against voltage drops in rural Irish supply lines.
With over 44 years of heritage in industrial electrical and compression engineering (under our premier manufacturing brand framework), we operate state-of-the-art automated assembly lines designed for maximum precision.
Every single rotary compressor leaving our factory undergoes rigorous automated testing protocols prior to packaging:
We provide comprehensive export support for Irish buyers, including customized OEM labeling, CE marking, RoHS certification documentation, and direct FOB/CIF container shipping to Dublin Port and Cork Port. Standardized pallets are heat-treated ISPM-15 compliant wooden crates with anti-corrosion VCI moisture-proof wrapping.
Addressing essential technical, logistical, and legal considerations for importing rotary compressors into Ireland from China.
All our exported compressors are natively designed to operate with low-GWP refrigerants such as R290 (GWP 3), R32 (GWP 675), and R454B. They use synthetic polyolester (POE) lubricants optimized for chemical stability under low-GWP operating pressures, ensuring full compliance with Regulation (EU) No 517/2014 and future 2026+ quota step-downs.
Standard ocean freight transit times from main Chinese export ports (Ningbo/Shanghai/Shenzhen) to Dublin Port or Cork Port average between 28 and 35 days. OEM orders are typically manufactured within 15–20 days, giving a total procurement timeline of 45–55 days door-to-door.
Yes. Every compressor series exported to Ireland holds full CE marking, compliance with Pressure Equipment Directive (PED 2014/68/EU), Low Voltage Directive (LVD 2014/35/EU), and RoHS directive compliance, complete with Declaration of Conformity documentation for Irish Customs clearance.
No modifications are needed. Our compressors are custom-wound specifically for European standard 230V ±10% 50Hz single-phase and 400V 50Hz three-phase grids. Inverter models accommodate wide voltage input ranges (180V–264V) to withstand local rural grid voltage spikes or sags.
Yes, our R&D team provides complete OEM/ODM customization including specific displacement tailoring, mounting foot dimensions, suction/discharge tube orientations, and custom acoustic sound-blanket jacket integration.
We provide a standard 18-to-36 month industrial warranty on compressor assemblies, along with 1% free spare parts (terminal blocks, thermal protectors, inverter boards) included in full container load (FCL) shipments.
Request complete technical datasheets, CAD drawings, performance curves, and direct factory pricing tailored for Irish industrial procurement.
